Teflon oven performance and matters needing attention

Teflon oven performance characteristics and product introduction:

1. Optional baking tray (only) or shelf (piece), or matching grill;

2. It can be customized according to user requirements;

3. Non-standard products can be designed and manufactured according to user requirements;

4. This product adopts digital display intelligent temperature instrument control, with self-stable PID regulation function, temperature control, easy to operate;

5. The intelligent meter has the function of time control. Users can set the working time according to their needs, and automatically stop heating at that time;

6. Door seal is made of high temperature resistant silicone rubber;

7. With direct expansion temperature controller for overtemperature protection, the equipment can operate reliably;

8. Sign oven is mainly used for drying printing ink of sign plating products, drying paint coating surface and other drying processes in various industries. It is also suitable for industrial and mining enterprises, scientific research institutions, colleges and universities, medical, biological and other laboratories.

Attention to the use of teflon oven:

1. This type of oven should work indoors and be installed smoothly;

2. The power input shall be equipped with special front-stage on-off switch and properly connected with earth wire;

3. Check the power supply, voltage and power supply wiring is correct, before power use;

4. In the new purchase and use or use for a long time, should first use low temperature baking 80-100℃ for two hours before starting to increase the temperature, to facilitate moisture leakage, enhance insulation performance and extend the life of porcelain parts;

5. The probe of the thermal sensor for temperature control of the instrument shall be inserted into the working room from the temperature measuring hole on the left side of the circuit, and shall not be inserted into the center hole of the header valve of the box to avoid affecting the use;

6. When the drying box is used for the first time, please observe it frequently to avoid overheating and damage of the workpiece, causing losses;

7. Turn off a set of heaters to reduce the heating power and prevent over temperature caused by excessive inertia when the heat habit is felt to be slightly larger;

8. Take out baking objects: do not hit the thermostat that extends into the studio to prevent damage to the thermostat and lead to failure;

9. Without "explosion-proof oven", do not bake explosive, flammable and volatile items to prevent explosion;

10. In case of failure, please call a professional electrician for maintenance.