A used in the production of teflon sintering oven, drying oven, including housing, the top surface of box body is set with
solar tank and vent, solar-thermal box right side set solar monitoring device,
before the end of box set oven door, the right side of box body is provided
with electric control cabinet, electric control cabinet set a timing device,
temperature control device, inlet valve, exhaust valve and switch button, box
body including shell and inner cavity, and setting of between shell and inner
cavity has a heat preservation cotton, inner chamber set on two cooling board,
two fans and purification device, casing set inside the rack and put tray, put
aside content disc set for both have cooling hole, The bottom center of the
shelf plate is provided with a connecting disk. The utility model has a simple
structure and strong practicability.
Through the combined heating method of
solar energy and electric energy, not only the styling effect is improved, but
also the service life is extended, the yield rate is increased, the energy
consumption is reduced, the cost is saved, and the comprehensive utilization
efficiency is improved.
Sintering oven used in the production of
ptfe, whose character is: the Sintering oven including enclosure, as described
in the top surface of box body is set with solar tank and vent, solar-thermal
box right side set solar monitoring device, in the right side of
the hole is located in the solar energy collection hot box, the box body front
end face of the oven door, oven door includes the first oven door and the oven
door and the oven door and described the oven door all set door the mouth and
observation, the right side of box body is provided with electric control
cabinet, electric control cabinet set timing device, temperature control
device, Air intake valve and exhaust valve and switch button, temperature
control device is set on the first heating button and the second heating
button, switch the power button, button, and explosion-proof fan button button,
box includes shell and inner cavity, with mentioned lumen between shell and a
heat preservation cotton, inner chamber set on two cooling board, two fans and
purification device, both on the heating panel Settings have mica heat sink,
purification plant is located in between two mentioned fan, box set inside the
rack and put tray, the bottom of the rack set wheels, put aside content disc
set for both have cooling hole, Plate center set up at the bottom of the shelf
are connecting disk, disk and a partition at connections, on the other side of
the baffle plate and described shelf plate connected, put aside material plate
is divided into four equal, connecting the center of the disk set has a hole,
the bottom of the box body set with wheel groove HeJinKong, wheel to match the
wheel groove and the stated, air inlet connected with the outside world.
No comments:
Post a Comment