Teflon PTFE Paste Automatic Extruder

Teflon PTFE Paste Automatic Extruder

Paster Extrusion tube process：PTFE Fine Powder raw material→Sifting→Mix with solvent→ Heating→Preforming→Extrusion→Sintering→Finished Tube. Matched machine: Machine screening, Mixing machine, Preforming machine, Extruder machine, and Furnace heating, Mould. Techincal Data Paste Extruder Type Technical Data DX-D01（suit for 25-60 lodaing cavity） OD:2mm-6mm PTFE Paste extrusion Hose Main machine: 30KW power 380V 50Hz one key start with hydraulic drive.1.2M high for material load cavity. WorkBlank machine: 3KW with 380V 50Hz Hydraulic drive PTFE blank high with 300-600mm. Furnace: 18KW 380V 50Hz with total high8.5M 500 degree temperature. DX-100 （suitable for 60-120 loading cavity） OD:6MM- 60MM -2 loading cavity FE Paste extrusion Hose Main machine: 30KW power 380V 40Hz one key start with hydraulic drive.1.5M high for material load cavity. WorkBlank machine: 3KW with 300V 50Hz Hydraulic drive PTFE blank high with 300-600mm. PTFE Hose Machine Specifications (1) Adopt adjustable speed to accommodate pitch ,don’t need to change gear (2) High productived efficiency production three times than present usual machine per hour ,the max production reach to 98m/hour (3) Low noise ,transmission and pulling system adopt absorbing sound ,reducing shake and inserting equipment. (4) Easy maintenance ,transmission flexible,structure easy install and remove (5) Spindle adopt elastic and adjustable equipment, dependable position, easy convenient and flexible install bobbin (6) Small abrasion and long using life, take key part used excellent material adopt heat treatment and lubricant equipment (7) Computer control setting the braiding pitch ,show the braiding machine working data . Source:http://www.sukoptfe.com/ptfe-hose-machine/teflon-ptfe-paste-automatic-extruder