PTFE film extruder

PTFE Film Extruder Features:anti-voltage intensity;high breakdown voltage;wide operation temperatures;Chemical resisting;High working temperatures;Low friction;Surface protect material;Taiwan AC motor with inverter is employed. The acceleration and the deceleration are fast and steady.

Diameter range for rotary cutting: Max diameter 900mm Min diameter 105mm;
Length range for rotary cutting: Max length 2050mm Min length 915mm;
Thickness range of Rod for rotary cutting : 0.2-7mm;
Power of main motor :37KW;
Total power of machine : 42.2KW;
Specification of blade : L 2100mm*W 80mm* T 13mm;
Outside size of machine : L 6945 * W 2500 * H 1600.

Description

1. Main Driving Part: Taiwan AC motor with inverter is installed. The acceleration and the deceleration are fast and steady.

2. Central Control Unit: programmable central control is used and various sizes (20 at most) can be set on the same shaft for automatic transfer and cutting.

3. Operating Panel: all functions are operated on the 10.4" Taiwan Wein View LCD touch panel.

4. Motor Control System: the central control system is PLC programmable controller. Various sizes can be set on the same shaft, and the cutting width is adjusted automatically.

5. Roll Cutting Positioning System: roll cutting positioning is controlled by Mitsubishi servo motor.

The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.

6. Blade Feeding Positioning System: blade feeding is controlled by Mitsubishi servo motor, and the cutting speed is adjustable in three stages. The efficiency is improved and the best quality is guaranteed.

7. Auto Angle Adjustment of Circular Blade: Mitsubishi servo motor is used to calculate the circular blade angle and the angle change is subject to different materials (the angle change range is ±8°).

The cutting angle is changed directly when the cutting surface is not smooth, so the efficiency is improved.

Source:https://www.sukoptfe.com/ptfe-film-extruder