PTFE Lined Pipe

PTFE lined pipe provides unmatched chemical resistance at temperatures to 260ºC. Because its carbon chains are completely fluoronated, PTFE is chemically inert to the following broad range of commercial chemicals:

• All acids including hydrofluoric, hydrochloric, sulphuric and aqua regia
• Chlorides - organic and inorganic
• Sulphates - organic and inorganic
• Bleach solutions
• Solvents
• Phenols
• Caustics
• Peroxides

Combined with the chemical inertness of PTFE are its usual non stick properties. Thus a PTFE lined pipe system eliminates and/or minimises build up of deposits on the pipe walls, which otherwise would reduce flow and possibly affect processing operations.

PTFE Lined Pipe for chemical resistance at extreme temperatures

• Size range - 25 - 300 NB
• Steel Pipe - Welded or seamless, schedule 40
• Flanges - Any speciation (ASA 150lb STD)
• Pressure - As per steel pipe recommendation
• Max Temp - 230ºC
• Exterior Finish - Primer (ROZC) or as specified
• QA to ASTM requirement
• Dye Penetrate Test
• Welding Certificates (WPS / PQR)
• Spark Test / Electrostatically
• NDT Test
• Hydrostatic Test
• Material Certification

PTFE lined pipe is suitable for water, acid, chemical, food, mining, petroleum, gas, medical and energy applications.

PTFE Lined Pipe and Fittings

Use PTFE lined piping in any application where superior chemical resistance is required. Compared to other plastic pipe lining, PTFE has been proven to reduce permeation rates by up to 60%. It is also far more resistant to corrosion and high temperatures, and it features a full vacuum rating up to 450°F.

As a result, PTFE lined pipe and fittings are ideal for severe service applications, including pulp and paper processing, and power generation. Compared to exotic alloy materials or glass lining, PTFE is an economical choice that gets the job done right.

ptfe lined pipe, teflon lined fittings

Our PTFE lined & jacketed steel dip pipes and spargers are manufactured to the highest standards in the industry. All units are given extreme stress tests to validate their integrity and ensure long life.

PTFE is one of the most versatile materials used for lined pipe and fittings. It is near-universally chemically resistant and capable of withstanding temperatures as high as 450°F (230°C), making it ideal for handling nitric acid, oleum, nitrobenzene and other fluids used in industrial and manufacturing processes.

Choose a PTFE pipe fitting for pharmaceutical, food and beverage, and other applications where performance can’t be sacrificed in the name of cost savings.

PTFE Lined Pipes.

Our PTFE lined pipe series starts from 25mm to 300mm Diameter and up to 3000mm in lengths. Our standard pipes are with one end fix flange and one end loose flange. 

• Size: 25 NB to 450 NB
• Pipe material: 106 grade B Sch 40 from 25 NB to 150 NB
• Flanges used: ASTM A 105/IS 2062
• Hydro test: at 29.8 Kg/cm2
• Spark test: 15 KVA

The manufactured using high-grade raw material, advent tools and sophisticated technologies, our range is widely used in diverse industrial applications. The raw material used during the fabrication process is sourced from reputed vendors such as DuPont. Offered in varied sizes & specifications, the range can also be customized as per the clients' requirements.

Features:High performance;Rugged;Low maintenance;Technical.

Extrusion PTFE Rod,Dia - 4mm to 200mm

Extrusion PTFE Rod has a wide range of practicable temperature from -180C~+260C and a wax-like surface to which anything hardly sticks. Extrusion Teflon rod has the lowest coefficient of friction of all known solid materials. Extrusion Teflon bar has the best electrical properties of all plastic.

Use of the Extrusion PTFE bar The electrical insulation used under various kinds of frequency, the seal liner of various kinds of corrosivity medium, Antisticking materials, lubrication material.

Project Name	Unit	Result
Apparent Density	g/cm3	2.1 ~ 2.3
Tensile Strength	Mpa	≥ 14.0
Ultimate Elongation	%	≥ 150
Dia. ( mm )	4, 5, 6, 7, 8, 9, 10, 12, 15, 18, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75, 80 ...150.. .200
Length ( mm )	1000mm ; 2000mm

Extruded PTFE Rod Dia,5mm ~ 500mm

• Material: 100% recycled PTFE granular resin
• Style: Extruded PTFE Rod
• Diameter: 5mm ~ 120mm
• Length: 100mm ~ 3000mm. etc.
• Density: 2.1 ~ 2.3 g/cm3
• Temp: -180° C ~ + 260° C

Extruded PTFE Rod (100% recycled) is manufactured by techniques of paste extruding and RAM extruding method in the diameter from 5 to 110mm with PTFE granular resin. As PTFE(Teflon) has a very low co-efficient of friction, the surface of extruded PTFE rod has similar friction levels to ice. Extruded PTFE rod can work at -180° C ~+260° C and is the best electrical insulator of all known plastics.

Diameter(mm)		Length(mm)
Nominal	Tolerance	Nominal	Tolerance
5, 6	+0.480	100	+5.0
7, 8, 9	+0.580	100	+5.0
10, 13, 15, 16, 18	+1.100	100, 1000	+3.60
20, 25, 30	+1.130	100, 1000	+3.60
35, 40, 45, 50	+1.600	100, 1000	+3.60
55, 60, 65, 70, 75, 80, 85, 90, 100	+2.000	100, 1000	+2.50
110, 120, 150, 200	+2.500	100, 1000	+2.50

Teflon Max ID 25 FT Convoluted PTFE Hose

PTFE Convoluted Hose, ranging from 1/8" inside diameter up to a 4" inside diameter. Normally supplied in natural PTFE, we can also provide this convoluted tubing in FEP, MFA, PFA, ETFE, PVDF, or PEEK™.
PTFE Convoluted Tubing is available in coils or with cuffs (straight ends on each side of the tubing) that can be sized on the inside or outside diameter. Flares and flanges for fittings are available upon request.
Note: Please allow 4-5 weeks standard delivery time for this product.

Features:

• Teflon® Tubing - Convoluted PTFE Features
• PTFE has the lowest coefficient of friction of any solid material allowing unrestricted flow.
• Teflon PTFE moisture retention is less than 0.01% over a 24 hour period.
• PTFE has an indefinite shelf life.
• PTFE has a low void content.

PTFE convoluted hose ID 40mm

PTFE Flexible Hose PTFE convoluted hose in high quality.

It can be replacement of the low strength graphite hose ceramic hose and glass hose Eliminate the high-frequency vibration.It can be the feeding and discharge hose of the tankers tanks containers and reactorsAlso connector of the dislocation pipeline or balance the displacement of the pipeline cause by weather changed or other reason1.Provide DN6-150mm length 20mm-20000mm.Customized are welcome2.Normal wall thickness:1mm-2.5mm thinnest wall can be 0.5mm3.The number of fatigue:>=100004.Enhance woven can be choosed5.Different connect way can be available Generally connected by the Flange Thread Quick connector or directly connect to the equipment fixed by the clamp or the wireWall Thickness Standard: 1.5mm-2.2mmFatigue Times1000Use: It can be used to connect low mechanical graphite porcelain and glass pipeline as supplying and discharging tube of tanker store tank container or reaction kettle. It can be used to connect dislocation pipe to balance pipeline displacement size change due to weather or other causes or to eliminate vibration of high frequency machinery. In some special occasions it can be used as tube reactor or heat exchanger.

Teflon PTFE Virgin Sheet, 1/16" - .062" x 12" x 12" White

Teflon PTFE Virgin Sheet,  1/16" - .062" x 12" x 12" White,Thickness Tolerance ±0.005".

PTFE, also known under the brand name Teflon, is a soft fluoropolymer mechanical plastic with exceptional resistance to high temperatures, chemicals, corrosion and stress cracking.

PTFE features impressive heat, mechanical toughness, electrical and low friction properties, making it the material of choice for many high heat and low friction applications.

PTFE plastic is available in FDA approved, electrical, mechanical, glass-filled and bearing grades.

Toaster 34 1/4" x 12 3/4" PTFE Release Sheets

Length: 34 1/4";Width: 12 3/4"

When your restaurant is in full swing, you can't afford to have anything slowing you down. With these 34 1/4" x 12 3/4" high speed toaster PTFE sheets you can offer your customers a faster, more reliable, streamlined service every time! The durable PTFE material prevents food from getting stuck and causing messes - never again will you have to worry about your toaster line running slow due to the clean up of stuck bread.

The triple-coated flouropolymer material ensures a long life of non-stick performance, up to 30% longer than many comparable release sheets. After use, simply wipe these sheets with a damp cloth for a quick and convenient clean up. Exceptionally heat-resistant, up to 500 degrees Fahrenheit, and easy to use, these non-stick toaster release sheets will help to significantly reduce a common kitchen frustration. These 34 1/4" x 12 3/4" PTFE release sheets are sure to keep your operation running smoothly for a long time to come.

Expanded Teflon Panel , Non-Toxic PTFE Sheet

Expanded PTFE sheet is made of 100% expanded PTFE by using special process that produces a uniform and highly fibrillated microstructure with a great lot of fibers running in multi directions.

PTFE Expanded Sheets gasketing possesses universal resistance against common chemicals, except melted alkali metal, fluorine at liquid and gas states.

It is free from asbestos and other lung-intruding materials. It meets the FDA requirements, doesn't have any corrosion and is able to be stored without any time limits. Some of its features are that it has Good Flexibility, Good Seal ability, highly compressible, Non Contaminating, and Non Toxic etc.


Advantage:1. High dielectric properties ;2. Non-toxic;3. Superb electrical insulating properties ;4. A wide working temperature range from 260°C down to liquid nitrogen temperatures (-260°C) ;5. Lowest coefficient of friction of any known material.;6. Tremendous chemical resistance;7. Limitations: low compressive & tensile strength.;8. Outstanding chemical resistance;9. Extremely low friction;10. Soft and formable;11. Good bearing and wear properties (bearing grade);12. Good weathering resistance;13. Performs well at elevated temperatures;14. Virgin and recycled materials available;15. Any sizes available.

Expanded PTFE Sheet Gasket, White, 1/8" Thick, 15" × 15"

Features:

• Maximum Pressure: 3000 pounds_per_square_inch
• Minimum Temperature: - 450 degrees_fahrenheit
• Maximum Temperature: 600 degrees_fahrenheit

Product Dimensions:

• Width: 2.50
• Length: 15.30
• Height: 1.40

Expanded PTFE sheet is made of 100% expanded PTFE by using special process that produces 

a uniform and highly fibrillated microstructure with a great lot of fibers running in multi directions.PTFE 

Expanded Sheets gasketing possesses universal resistance against common chemicals, except melted 

alkali metal, fluorine at liquid and gas states. It is free from asbestos and other lung-intruding materials. 

Expanded PTFE Gasket Sheet

PTFE Sheet is made in a process that produces a uniform and highly fibrillated microstructure with equal tensile strength in all directions. The result material is much softer and more flexible than any other form of PTFE sheet and as a gasket, conforms easily to irregular and rough surfaces. In addition, the material is easier to compress and minimizes creep and cold flow, associated with skived PTFE sheet. PTFE Gasket Sheet will seal all aggressive chemicals over the entire 0-14 pH range except for molten alkali metals and elemental fluorine. Made from 100% virgin PTFE, and will not contaminate or discolor end products.

16 3/5" x 8 3/8" PTFE Release Sheets

When your restaurant is in full swing, you can't afford to have anything slowing you down. With these 16 3/5" x 8 3/8" PTFE panini grill release sheets, you can offer your customers a faster, more reliable, streamlined service every time! Four built-in guide holes make these sheets easy to apply to your compatible grill. The durable PTFE material prevents food from getting stuck and causing messes - never again will you have to worry about your grill line running slowly due to the cleanup of stuck bread, cheeses, and more.

The triple-coated flouropolymer material ensures a long life of non-stick performance, up to 30% longer than many comparable release sheets. After use, simply wipe these sheets with a damp cloth for a quick and convenient cleanup. Exceptionally heat-resistant, up to 500 degrees Fahrenheit, and easy to use, these non-stick panini grill release sheets will help to significantly reduce a common kitchen frustration. These 16 3/5" x 8 3/8" PTFE sheets are sure to keep your operation running smoothly for a long time to come.

Overall Dimensions:
Length: 16 3/5"; Width: 8 3/8"

Stainless Braided PTFE Teflon Fuel Line Oil Gas Hose

• Braided stainless steel outer cover for excellent abrasion resistance. 
• Max Pressure is rated to up to 4000 PSI.
• The continuous temperature rating from -70°C to 250°C.

The PTFE lined hose is designed to handle any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, powersteering fluids and nitrous oxide. Suitable for Brake, E85, Alcohol, Nitro, transmission, cluth, nitrous, power steering, oiling, hydraulics & vacuum applications.

Item Specifications
Type	Brake Line Hose
Length	1 Meter / 3.3ft
Materials	Inner PTFE Telfon White
Materials Outer Cover	Stainless Steel Braided
Color	Silver
ID	1/8inch - 3.1mm
OD	1/4inch - 6.5mm
Max. Continuous Length	50 Meter / 160 FT

PTFE Braided Hose/Line 50 cm 6AN O.D. 11 mm 7/16" w/ F

Description:

• Braided Steel PTFE Lined / Hose 6 AN Straight to Straight 50cm with 6AN female connectors on both ends.
• Braided stainless steel outer cover for excellent abrasion resistance. 
• Max Pressure is rated to up to 4000 PSI.
• The continuous temperature rating from -70°C to 250°C.
• Hose Size: 3/8" ID or 10 mm ID
•        7/16" OD or 11 mm OD

Application:
The hose is designed to handle any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, powersteering fluids and nitrous oxide. Suitable for Brake, E85, Alcohol, Nitro, transmission, cluth, nitrous, power steering, oiling, hydraulics & vacuum applications.

Teflon - PTFE Plastic Round Rod 1-1/8" dia

PTFE (Polytetrafluoroethylene) is most commonly known as "Teflon" a brand name of the material produced by Dupont. It is a self-lubricating that offers the lowest coeffecient of friction of any material. It also has astonishing chemical resistance along with a service operating temperature of 500F.

PTFE tube has many applications throughout industry. The unique properties allow the tubing to solve problems possible with no other material. Compared with similar polymers it normally has the bestprice/performance ratio.

Material: Plastic
Grade: Virgin PTFE
Color: White
Shape: Round Rod
Diameter: 1-1/8 inch
Length: 24 inches

PTFE Teflon Tube Pipe Dia 16mm ~ 65mm White

PTFE Tube by Extruded, Molded and Filled. Extruded ptfe tubing OD from 1mm to 300mm. Molded ptfe tubing from 30mm to 600mm.Filled ptfe( Filled graphite, Filled Fiber glass, Filled Bronze, Filled Carbon ), Size OD from 30mm to 600mm.

Working temperature:-180 ~ +260 degree;Elongation:230% ;Tensile strength: 18 MPa;Density: 2.1~2.3 g/cm^3

PTFE Film Sheet Heat Press .005 x 16"x30FT

Protect from keeping your heat press & garments clean from any residue on the heat plate.  Can be used well over 2,000 uses

• Material: PTFE(polytetrafluoroethylene)
• Teflon Roll for Heat Press
• 1 Premium Teflon Roll
• 16 Inches by 10 Yards
• Working temperature range: -200-260℃

Teflon film, made from polytetrafluoroethylene (PTFE), are widely known hydrophobic materials.Wide operating temperature range: -200-260℃;High Corrosion resistance, for most chemicals and solvents, showing an inert,resistant to acid and alkali, water and various organic solvents; Outstanding flame retardancy, Safe and reliable; Ideal mechanical properties include anti-aging properties especially for bending and wobble applications.

PTFE Film White Teflon Thin Sheet 0.5×1×0.1mm

PTFE Film White Teflon Thin Sheet 0.5×1×0.1mm

• Material: PTFE(polytetrafluoroethylene)
• Color: White
• Width: 1000mm (3 ft.)
• Length: 500mm (20 inch)
• Thickness: 0.1mm(0.004 inch)
• Working temperature range: -200-260℃

Wide operating temperature range: -200-260℃;High Corrosion resistance, for most chemicals and solvents, showing an inert,resistant to acid and alkali, water and various organic solvents; Outstanding flame retardancy, Safe and reliable; Ideal mechanical properties include anti-aging properties especially for bending and wobble applications.

Teflon PTFE Film Sheet 500mmx500mmx8mm

PFTE (Polytetrafluoroethylene) is most commonly known as "Teflon" a brand name of the material produced by Dupont.
It is a self-lubricating that offers the lowest coeffecient of friction of any material.
It also has astonishing chemical resistance along with a service operating temperature of ±500F.

• Material: PFTE (Teflon )
• Grade: Raw materials
• Length: 500mm
• Width:   500mm
• Thickness: 8mm
• Color: White 
• Other Size:0.2 mm;0.5 mm;More Size:PTFE Film.

Package Includes : 1pcs 500x500x8mm  PTFE Film

Teflon PTFE Film Sheet 500mmx500mmx0.5mm

Package include:1pcs 500mm * 500mm * 0.3mm

• High temperature - Use working temperature of 250 ℃.
• Low temperature - with good mechanical toughness; even if the temperature drops to -196 ℃, but also to maintain a 5%elongation.
• Corrosion - for most chemicals and solvents, showing an inert, resistant to acid and alkali, water and various organicsolvents.
• Weatherability - the best plastic aging life.
• High lubrication - is a solid material in the lowest coefficient of friction.
• Not adhere to - is a solid material in the minimum surface tension, does not adhere to any substance.
• Non-toxic - with physical inertia, as a long-term implantation of artificial blood vessels and organs of the body withoutadverse reaction.
• Electrical insulating properties - can withstand 1500 volts high voltage 

Other Size:0.2 mm;0.5 mm;More Size:PTFE Film.

UHMWPE ROD - BLACK & NATURAL, OD 2.5'' - 12''

Reprocessed UHMWPE can be fabricated to make wheels, component parts, pinion gears and flanged rollers. It has seen applications as diverse as railroad cars, spacecraft and hydroelectric plants.

Features:

* Odorless, tasteless and nontoxic
* Highly corrosive to chemicals (except oxidizing acids)
* Extremely low moisture absorption
* Very low coefficient of friction
* Self-lubricating
* Highly resistant to wear and abrasion
* Easy to fabricate and machine with common shop and woodworking tools
* Reprocessed grades, enhanced bearing and wear grades available, FDA compliant grades available for greatly extended part life
* Reduced maintenance costs and energy consumption
* Extends equipment life

UHMWPE is a common machinable plastic known for durability, versatility and cost-effectiveness as well as abrasion, impact and chemical resistances. UHMWPE plastic features a molecular weight that ranges from 3.1 million to 100 million grams per mole, with an abrasion resistance that continues to improve as molecular weight increases.

Reprocessed UHMWPE is an eco-friendly and economical alternative to standard virgin UHMWPE that uses a blended version of virgin and recycled UHMWPE. Reprocessed UHMWPE is excellent for non-food applications and offers all the benefits of standard UHMWPE at a much more cost effective price. Reprocessed UHMWPE features the same low coefficient of friction as standard UHMWPE while also offering a slightly better wear resistance. Reprocessed UHMWPE is used extensively for chain guides, wear rails, chute liners, truck liners, hopper liners and many other applications where excellent wear properties are required. The standard color of reprocessed UHMWPE is black.

Rod, UHMW-PE, Black, 1/2 In Dia x 6 Ft L

Rod Stock, Black Virgin, UHMWPE Rod, Black Color, Diameter 1/2 In, Length 6 Ft, Diameter Tolerance +0.060/-0.000 In, Length Tolerance +0.060/-0.000 In, Min. Temp. Rating -22 Deg. F, Max. Temp. 180 F, Tensile Strength 5800 PSI

Standards: -	Max. Temp. (F): 180
Item: Rod Stock	Material: UHMW-PE
Color: Black	Length Tolerance: +0.060/-0.000"
Type: Black Virgin	Min. Temp. (F): -22
Tensile Strength (PSI): 5800	Impact Strength (Lbs.): -
Length: 6 Ft	Diameter Tolerance: +0.060/-0.000"
Diameter: 1/2"	Country of Origin (subject to change): United States